The whole idea behind an automated garage opener is the convenience of a door you can open and shut while going in and out of your garage. However, sometimes, the convenience becomes an inconvenience when the automatic garage door malfunctions. Unless you know how to manually open the door, then you are stuck with a stuck garage door, if you will.
How Does A Garage Door Opener Work?
Automatic garage openers have a manual release cord connected to the carriage. This is the feature that will help you open the door manually in case of power outages or when a mechanical fault causes it to stop working. You may also want to operate the door when doing routine maintenance, such as lubricating various parts.
How Do You Disconnect A Garage Door Opener?
First check that the garage door is unlocked and that it is in the closed position. You can then pull down the red manual release cord, which will disconnect the operator from the garage door. When this is done, you should be able to open the door manually without any problem as long as the door is well balanced and has no problems.
If the door does not open easily and feels heavy, carefully examine the various parts of the door. Look for cracks, loose screws, bolts and nuts, obstructions and other signs of wear or weakness that can be causing the problem. Sometimes, all that is needed is an even coat of high quality lubricant.
Avoid handling springs and cables. These parts are under high tension and can cause serious injury and damages if they should suddenly release. It is best to leave tasks larger than lubrication and loose screws to the experts.
How Do You Reconnect A Garage Door And Opener?
If the opener failed because of power outage and power is restored, you should be able to reconnect the door without a problem. You can also reconnect the door if lubrication or tightening loose bits has the door moving smoothly again. Otherwise, it is best to leave the opener disconnected until the experts look at it, determine the problem and handle it.
Pull the door down to reconnect. There will be a close button on your wall station. Push this button and the opener will get the trolley moving until it becomes connected to the tow bar arm. There are operators that cannot be connected electronically. If so, pull the manual release cord towards the door when the trolley takes position near the door.
If you are still experiencing issues with your garage door opener, you may need to call a professional garage door installer. Contact Amarillo garage door business, Willow Creek Overhead Door, for a free repair estimate today.